LuvitRED FAQ
A visually configurable device agent that is part of the CloudGate solution. It is based on IBM’s Node-RED, ”A visual tool for wiring the Internet of Th...
Tue, 20 Feb, 2018 at 9:46 AM
LuvitRED can be downloaded from www.cloudgateuniverse.com. CloudGate Universe -> Library -> Applications -> Option LuvitRED 2.0
Tue, 20 Feb, 2018 at 9:49 AM
During development you are mostly developing on a single cloudgate, but you want to release your flow onto a fleet of cloudgate. This article explains how t...
Fri, 7 Jun, 2019 at 4:48 PM
For IoThub, LuvitRed contains the 'iothub' in- and out-nodes. The documentation on how to use these nodes can be found on cloudgateuniverse or und...
Fri, 7 Sep, 2018 at 11:53 AM
Yes. RS-422 is the same signaling as RS-485 but bidirectional. The industrial serial card (CG1102) supports this mode, however it requires specific command...
Tue, 20 Feb, 2018 at 11:04 AM
What memory location you should use depends on your application and a couple factors. Do you need the data to be reboot persistent (non volatile)? Or do y...
Wed, 13 Feb, 2019 at 3:04 PM
If you just upgraded and you are experiencing a 'duty-cycle exceeded error', no worries, here's the solution! This error appeared...
Mon, 6 Jul, 2020 at 6:24 PM
LoraWAN EU868 devices are capable of operating in the 863 to 870 MHz frequency band. The specification requires devices to support a minimum set of common f...
Mon, 4 Mar, 2019 at 3:17 PM
This guide explains how to use the BLE expansion card (https://cloudgateuniverse.com/docs/ble-card ) on CloudGate. To follow this guide, you need to ha...
Tue, 24 Nov, 2020 at 6:30 PM
You can install firmware, applications or configurations in two ways: Remote Provisioning Through CloudGate Universe (Recommended) Local Provisioning us...
Thu, 27 Feb, 2020 at 12:53 PM