This is the final step in setting up your CloudGate. 


  1. Browse to the “Main Menu” →  “Wizzard” tab:
  2. Enable “Bacnet device” in the output section. A button called “Bacnet device” will appear on your right hand side:

  3. Click on this “Bacnet device” button to configure the BACnet controller.

  4. Fill in the BACnet settings (in this example another CloudGate was used as controller) and click on "Save changes":

  5. Under Bacnet objects you can see an overview of the BACnet objects on your device. Bellow is an example using a single LoRa sensor:



Congratulations, your CloudGate is now fully configured and ready to connect to a BACnet controller!